Started working on the Elevators
6 Sep 2016 3 hours

Tonight I started work on the Elevators. There was a lot of prep work on small parts tonight. First I had to cut and separate the forward elevator rib halves. Then I cut and separated the rib shear clips. Finally I cut and sanded the foam aft elevator ribs.

The forward elevator ribs before being cut and deburred. Notice the black pen lines, they indicate where the ribs need to be separated

The rib shear clips, ready to be separated and trimmed

The shear clips after being cut and separated

Foam block with the paper template for some of the aft elevator ribs glued on with spray adhesive

The foam ribs, but out on the bandsaw and sanded, using the paper template as a guide

Design pdevty