Install rudder cable guides, nut plates and UAT cable

Tonight I started out by riveting the reinforcement angles located in the aft most compartment. Then I riveted on the rudder stops. Then it was time for the nut plate in the aft compartment to be riveted on. Lastly I ran the UAT cable to the back of the fuselage

Rudder stops riveted on

Had to dimple the nut plate before installing them

Nut plates installed

Rudder cable guide installed

A shot of the rudder cable guide from the inside

UAT cable ran

The UAT cable runs to the second most aft bulkhead

Design pdevty