Began work on rear spars
Tonight I worked on the rear spars. Unfortunately I forgot to take pictures. I did get a lot of work done though.
- Assembled the aileron brackets (use parts from the vans service bulletin)
- Back drilled the rear spar doubler plates
- Cut out the hole in the rear spar doubler plates for the aileron push/pull rod
- Match drilled the inboard doubler, ribs and reinforcement plates for the right wing.
Should be able to wrap up the left wing tomorrow and get everything primed.
The aileron push/pull rod whole cut out in one of the doublers. I used the mill to get the hole started and then finished with the Dremel
