Began work on wing tips
7 Jan 2017 4 hours

Today I began working on the wing tips. I did all the trimming today. Including trimming the fiberglass wingtips to fit and trimming the wingtip lenses to fit.

Trimming the inboard edges of the wingtips.

Next up was trimming the lenses. First I had to cut them into two pieces. One for the left and the other for the right tip

Lenses cut and half

next they had to be trimmed and sanding over several iterations to get them to fit nice

Here are the lenses all trimmed. Next there going to need to be drilled with a couple of holes to mount them to the tips

Design pdevty