Tonight Wendy came down to the shop and helped me drill, debur and dimple all of the wing ribs. It was a monotonous job, but it had to get done. Big thanks to Wendy!
Wendy and I drilling out the holes in the wing ribs Wendy dimpling the holes on the wing ribs Wendy's peeling the plastics off the ribs while I deburred them with the die grinder All the ribs deburred, drilled and dimpled.
Today was a short day, then it was of to the Acworth Beer Festival =) I did manage to debur, prime and attach the aileron bellcrank brackets to the spars.
The right aileron bellcrank bracket, which includes provisions for the autopilot servo Left aileron bellcrank bracket
Tonight I finished riveting the nutplates onto the spar. Then it was time to countersink all of the holes in the spar flanges. After that I primed the spar flanges since the countersinking removes the anodized coating.
Tank attach nutplates in the spar web The access plate nutplates riveted in More nutplates All the bazillion holes in the spar flanges countersunk The spar flanges and tiedowns primed
Tonight was a lot of drlling and countersinking. I drilled out the remaining holes in the spar flanges and then counterunk the holes for the fuel tank and access plate nutplates. After installing the nutplates for the tank attach screws I countersunk the holes. Tomorrow I’ll finishing install the nutplates for the wing access convers.
Counterinking the rivet holes for the nutplates Nutplate holes countersunk The tank attach nutplates installed and the screw holes countersunk Nutplates riveted on
Yesterday the wing crates were delivered. Zak came over and helped me unpack and inventory everything. A couple of parts were missing and one item was back-ordered. I contacted Van’s today and there going to get the missing parts sent out to me.
Tonight I got start on the main wing spar section. I fabricated and drilled out the Wing Box J-Channels for both wings
Picture of the left wing spar The J-Channels clamped in place for drilling The J-Channels drilled and put away
The wing crates were delivered today. Zak came over and helped me unpack and inventory everything. Big thanks Zak! A couple of parts were missing and one item was back-ordered. I’ll contact Van’s tomorrow and have them send out the missing parts and get an ETA on the back-ordered item.
Wing crate # 1 Wing crate # 2