Tonight I finished working on the forward middle bulkheads. Bearing brace brackets riveted together Countersunk holes in the forward center section bulkhead Riveted nutplates onto the forward center section bulkhead Riveted the cover ribs and side angles onto the forward center section bulkhead Riveted the bearing brace bracket to the cover ribs and the web of the center section bulkhead Reamed the holes in the forward center section bulkhead

Today I continued work on the forward middle bulkheads I started the day off countersinking holes in the aft center section bulkheads Next I prepped the remaining parts of the middle bulkhead for priming Bearing bracket countersunk and ready for priming Parts primed Riveted the nutplates onto the aft center section bulkhead Riveted the side angles onto the aft center section Riveted the bearing bracket together Riveted the bearing bracket

Today I started working on the forward mid fuselage bulkheads. Some of the steps required the use of a reamer, both a .311 and .375 reamer. I missed that when reviewing tools to buy for fuselage work. Luckily McMaster-Carr is open on Saturdays for a half day. $45 and 1 hour hour drive later I was back in business. Mid fuselage bulkheads parts primed Started riveting the doublers and side
Design pdevty