Tonight I finished running the engine sensors wires firewall forward. This included the fuel flow sensor, CHT, EGT and Oil Temp. I think I’m almost done with all of the wiring on the cabin side. I’m in the processing of starting to install the backshells on the garmin connectors.
Fabricated a harness using K-Type thermocouple wire for the EGT and CHT leads. All of the engine sensor wire connections are made and the backshells installed.
Installed fuel pressure sensor Installed Mag/Start switch I'm in the process of running all of the engine sensor wires firewall forward. They will be trimmed to length once the engine is installed and the sensors are connected
Wired the ammeter shunt. I made a fusible link by connect about 6" of 24ga wire to the 20ga wire that I ran from the control box. I wrapped the 24ga wire in silicone tape. The idea is that if the wires ever short, the 24ga wire with heat up and sever, acting like a fuse. The silicone is to help contain the heat, and mitigate the risk of the something catching fire.